[China Glass Net] Thick glass door refers to the decorative door with a thickness of 12mm or more. It is generally composed of two parts: the movable fan and the fixed glass. The door frame is divided into stainless steel, copper and aluminum alloy. Preparation for construction, check the ground elevation and the height of the top structure of the door frame to meet the design requirements before construction. Determine the position of the door frame and how to install the glass. Choose the glass according to the design requirements. Finished profile door frame, limit groove, plate and glass glue, floor spring, wood screw, self-tapping screw and other auxiliary materials. Fixing the door frame thick glass installation line, positioning According to the design requirements, release the door frame position line, determine the fixed and movable part installation control line. Ladies Shorts Jeans,Lady's Shorts,Lady's Short Pants,Lady's Casual Shorts zhejiang tianjin import and export co.,ltd. , https://www.tianjintextiles.com
The width of the stainless steel limit groove limit groove on the top of the installation door frame should be greater than the glass thickness of 2 to 4 mm, and the groove depth is 10 to 20 mm. Install the stainless steel veneer on the ground first, then glue the stainless steel panel to the wooden side. The aluminum alloy square tube can be fixed on the frame column with an aluminum corner code, or can be fixed on the embedded embedded part by screws. Cut glass (usually pre-cut, then tempered and transported to the site for installation) should measure the size of the bottom, middle and top of the real volume, select the smaller size to cut the size of the glass width.
If the dimensions measured in the upper, middle and lower are the same, the size is cut, the width is less than the measured size of 2 to 3 mm, and the height is less than 3 to 5 mm. For the cut glass, the chamfered edging shall be carried out on the four sides by hand-held oil-coated stone, with a chamfer width of 2 mm. Install the glass with a glass suction cup to lift the thick glass up, insert the thick glass plate into the limit groove at the top of the door frame, and then place it on the bottom bracket so that the edge of the thick glass plate just seals the side frame column. Stainless steel trims the seams.
Method and process of installing glass door