[This site - shoes and life] 1. Choose high-heeled shoes that match your foot shape Most of the pain caused by wearing high heels is caused by the excessive slide of the foot. Selecting high-heeled shoes with space on the inner side of the upper for your feet can help relieve pain. 2. Pay attention to the angle of tilt of high heels Gradually, the steepness of the arch should be matched with the curvature of the heel, and the heel for the arch can reduce the foot pain caused by wearing high heels. Heel height should be appropriate. If you want to know whether the height of a pair of heels has exceeded your tolerance limit, try to increase the heel without keeping the legs from bending. See if the heel is about one centimeter away from the ground. If you can't lift it, Description has exceeded limit! 3. Wearing open-toed high heels It can reduce pressure stimuli on corns and gills. If you have corns and calluses, you need to see a doctor and use their help to cancel and correct the cause of foot pain. At the same time, please choose open-toe high heels to release pressure on areas with inflammation. 4. Use cushion If the pain of the toe bones or the time to stand in high heels is long, silicone insole should be placed in the position of the sacrum. This insole’s job is to provide a good cushion and absorb the impact of the ground on the impact of the foot. 5. Wear thick heels Thicker heels are used to obtain better balance. By dispersing the weight distribution on the soles of the feet, the pressure is evenly balanced, which acts as a cushion rather than direct pressure on the heel. Alternating high heels can help reduce the pain associated with Achilles tendon. Will you feel a lot easier when you change to a lower-heeled shoe? And remember not to wear high-heeled shoes that are more than 7cm high for long periods of time. Pay for the beauty. 6. Hot feet High-heeled shoes are worn for the whole day. Even experienced people are in pain. When they come back home, put on flat shoes, flush hot bubbles, and promote blood circulation around the feet, which can relieve pain. . Don't soak for 15 minutes. Tufflex is polyurethane coated Stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens. Tufflex Screen Tufflex Screen , Polyurethane screen , Steel Wire Rope Core Polyurethane Mesh, Polyurethane Screen Mesh HUATAO LOVER WIRE MESH CO.,LTD. , https://www.huataowiremesh.com
The Tufflex Screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering. This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required. The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side-tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top, running in a cross-flow orientation, or positioned underneath the rope with the wire.
Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck. Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths. The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflex`s cloth construction.
The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer periods between changeover and less downtime during busy screening periods.
The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes, similar to woven wire. The wire rope diameter ranges from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide. The construction varies with either fully or partially welded wires. Sheets of poly can also be welded on for [hot spot" impact protection or enhanced abrasion protection along the hooks.
6 strokes to reduce the pain in high heels